ZMODO IP Camera Bedienungsanleitung Seite 48

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 61
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 47
46
®
[Week/Time]
You can choose one day from Monday to Sunday, or choose everyday in the week, also there is
a time period for you to choose. You need to click the time check to enable the time selection.
After setting all parameters, click the [Submit] button, the setting will take effect immediately.
4.2.4 Alarm Setting
Figure 4-16 Motion Detection Setting
[Time]
Set the protection time of motion detection. It can set detail time period of everyday, up to four time
periods.
[Motion detection]
Set open or close of motion detection, enable this switch to edit the motion detection area.
[Motion detection area setting]
After enable motion detection switch, the setting interface will appear grid
line. User only needs to click the little cube on the image to set the motion detection area. Right click the little
cube to cancel related area detection.
[Alarm Method]
Set linkage output format after triggered alarm. Four methods for you to choose: Capture,
record, email and upload. Sending email is sending motion detection alarm information via email to user, the
detailed Email parameter see chapter 4.2.2. There will be no Email alert if user didn't set email parameter
previously.
[Sensitivity]
The sensitivity of motion detection includes three levels: High, Little high, Medium, and Low.
[Output delay]
Set delay time of alarm linkage, time range is limited between 0~30sec.
After setting all parameters, click the [Submit] button, the setting will take effect immediately.
4.2.5 System Information
[Version]
Display device name, system version, video/audio channel number, sensor/alarm input/output, local
storage.
[Time setting switch]
Enable this switch to manually set the system date and time; disable this switch then
the system date and time will be synchronized with local PC only to check the status and can't be congured to
disable this switch.
After setting all parameters, click the [Sync time] button, the setting will take effect immediately.
Seitenansicht 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare