2) Advanced Setting of Record
Please enter <Tool Bar>→< Setting >→<Record>→【Advanced Setting>>】→<SUB STREAM>, select
“On”
and press 【】 key to enter the setting screen. Then user can customize the sub-stream frame rate and bit
rate. The Sub-stream supports a frame rate of 1-15, and a bit rate 32K-512K.
3) Advanced Setting of Video
Please enter <Tool Bar>→< Setting >→<Video>→【Advanced Setting>>】
*MOTION HANDLING
Motion Handling settings allow you to link specific actions to motion detection for the channel selected on
the first page of the Video settings: “RECORD " / " ALARM OUT " / " BUZZER " / " UPLOAD " can all be
linked or disabled when regarding motion on this page.
Note:Please refer to “4.2.2 Motion Detection Settings” for the setting of detection area and sensitivity.
*VIDEO EXCEPTION HANDLING
After the selected video channel signal is lost this setting will trigger the selected setting just as the motion
handling page does for motion: " ALARM OUT " / " Buzzer " / " UPLOAD "
*CHANNEL NAME SETTING
This feature will allow you to change the channel display name from “Channel 1”, “Channel 2”, etc to any
desired name.
Chapter Five: Appendix
1 Specifications
16 channel DVR Specifications
Linux 2.6 O/S
Pentaplex operation: record, playback, preview and network
browse, backup supported.
16 channel, BNC, 1Vp-p,75Ω
PAL (625 line, 50 f/s), NTSC (525 line, 60 f/s), SECAM
(625 line, 50 f/s)
4 channel, RCA, 2Vp-p,600Ω
1 channel, DIN-15(optional); 800×600@60Hz、
1024×768@60Hz、1280×1024@60Hz、1440×900@60Hz
1 channel, BNC, 1Vp-p,75Ω
1 channel, RCA, 2Vp-p, 600Ω
Support USB storage device, USB mouse, USB burner.
1 port, receiving and transmitting duplex supported.
4RJ45 10/100M self-adaptive.
1 channel NO/NC, relay: 30VDC/1A,125VAC/1A
2 SATA port, 2 SATA HDD up to 2T supported.
Video Compression
Resolution
PAL:352×288(CIF)NTSC: 352×240(CIF)
PAL:25F/S/CH 1,3,6,12,25 and user-defined optional;
NTSC: 30F/S/CH 1,3,7,15,30 and user-defined optional.
32kbps-2048kbps(14M byte/hour - 922M byte/hour).
PAL:720×576(D1),horizontal line 550, vertical line 450
NTSC:720×480(D1),horizontal line 550, vertical line 400
PAL: 352×288(CIF),horizontal line 300, vertical line 250
NTSC: 352×240(CIF),horizontal line 300, vertical line 220
Input/Output
Sampling Rate
Kommentare zu diesen Handbüchern