ZMODO H.264 Bedienungsanleitung PDF herunterladen (Seite 28)

iOS Setup

Figure 1 Figure 2

Figure3 Figure 4

Device Management:

1. From the home screen(Fig1) press the

settings arrow in the bottom left and select

“Device Manage”(Fig2).

2. From the management screen(Fig3) select

the “+” icon in the upper right hand corner

to add a device.

3. From the “Add Device” page(Fig4) enter a

name for the DVR. Now enter the

corresponding IP address, Mobile port

number, case sensitive username and

password, and the number of channels your

DVR has. Current channel is 0.

4. Select “save” to save your device. (Note:

Greyed out values must have something

input before you will be able to save.

Connecting to a Device

1. From the home screen(Fig1) select 1 of the 4

windows so that an orange highlight is around the

perimeter of the box.

2. Press the settings arrow in the bottom left and select

“Connect to Device”(Fig2).

3. From this device list step 1 will bring you to you may

select your device from the list. After selecting your

device you may choose a channel to play. This will

play your camera in the box previously selected in

step 1.

4. Repeat steps 1 through 3 up to four times. Each box

may be connected to either the same or separate

devices from the list and be controlled

independently

1 2 ... 23 24 25 26 27 28 29

Keine Kommentare

ZMODO H.264 Bedienungsanleitung Seite 28