ZMODO H.264 Bedienungsanleitung PDF herunterladen (Seite 18)

the future for potential updates regarding this feature.

*Email Setting： Click [], the EMAIL setup screen will appear. To take effect this function must be paired with

an alarm email setting. Enter the smtp mail server address in the screen, the corresponding smtp port

number(if the port uses SSL you must check the box indicating such) the desired email address to be used for

sending the email, that emails corresponding password(please check the validating identity box), and the

recipient email address, Pressing the [Test] button next to sender mail address will send a test email if the

settings match up to the chosen email address.

*Mobile port: This port controls all information transmitted for viewing and control via a mobile device such

as a smart phone or tablet when used in conjunction with the Zviewer application on the device.

*FTP server: Please refer to the previous section regarding file sharing.

*UPnP: To start UPnP set the feature to on and select []. UPnP, short for universal plug and play, when

connected to a network with the same feature will automatically map out and open the necessary ports in

order of the user to be able to view the system through the internet. Not all networks or routers in use today

have this feature. Refer to your routers user manual for more information on compatibility.

*IP ACCESS: When disabled any PC(IP address) can access the device. When set to “Allow Access” only

devices using IP addresses entered in to this setting will be allowed access to the IE web client and all

others will be restricted at the log in screen. When using the “Forbidden” setting any device will have access

to the IE web client with the exception of devices using IP addresses entered in to this category. Only one of

these 3 settings is in effect at any time.

*Time synchronization: Click [] to start synchronization. The device can automatically update its time and

date based on the server information entered in this option. If turned off the device when connected to the

internet will pull a date and time from a default server and update accordingly.

Note1: Any settings adjusted in the network will not take effect until saved from the save menu.

Note2: Currently mail using PPPoE is only supported if using the SMTP protocol.

Note3: Regarding the mobile port as of 04/01/2013 the only officially supported mobile platforms are

Android and iOS. Please refer to our knowledgebase at http://kb.zmodo.com for future updates to this

information.

2) Web Client Operation

BEFORE PROCEEDING: Set IE ActiveX Controls. Instructions at: http://kb.zmodo.com/article.php?id=96

Open IE browser, type in the IP address of the DVR and the corresponding web port if you are using anything

other than 80. The log-in screen will appear.

Note1: If PPPoE or DHCP is selected, the user should check the IP address again after restarting device.

Note2: If it is the first time logging in through IE, after setting ActiveX as mentioned above you will have to

install the IE Add-On associated with the DVR. The default user name and password are: Admin (case

sensitive) and the password is either 111111 or 888888.

Note3: Compared with the local side, the added settings on IE Web client side are as the table below:

Table IV 1 Settings added on IE side

Contents

<Server>Tab

Name of server is configurable on Web client side.

<Channel>Tab

The channel OSD is User-defined.

<Device>Tab

User can adjust miniNVR time accordance with PC time.

<State>Tab

Device states can be viewed directly.

3) Web Screen Description

FigIV 3Web Screen

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

ZMODO H.264 Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) ZMODO H.264