ZMODO H.264 Bedienungsanleitung PDF herunterladen (Seite 19)

*Address

Display the DVR IP address.

*Tool Bar

The description of icons from left to right is:

Configure device parameters.

Search and playback record files.

View logs and export them.

Set the storage directory of record files.

Click to switch image view modes among full-screen, single view and 4/8/9 split view mode.

Log-out, restart device, Clear alarm

*Alarm Notification

When network connection is broken or abnormal, the alarm notification of “No heartbeat of device, please

check the network!” will be displayed in the right up side of the main screen. After recovery of network, the

camera preview will be displayed automatically.

When alarms on remote notification occur, the alarm notification with alarm input number contained such as

“Device alarm: IO alarm, IO input x” will be displayed in the right upper side of the main screen.

When alarms of motion detection with remote notification occur, the alarm notification with the alarm channel

number contained such as “Device alarm: motion detection, channel 1” will be displayed in the upper right side

of the main screen.

When alarms of video loss occur the alarm notification with the alarm channel number contained such as

“Device alarm: video loss, channel x” will be displayed in the upper right side of the main screen.

*Preview

，：Adjust image contrast up/down.

，：Adjust brightness up/down.

：Start/stop voice monitoring. The icon will turn to green when sound is on.

：Start/stop recording. The icon will turn to green when recording.

：Click to snapshot the image in the camera at that moment.

：Stop preview.

Note: Click to set the storage directory of record files and pictures captured.

*PTZ Setting

The PTZ setting of client web is similar as the PTZ operation of local device, please refer to IV.5.1 PTZ

Control.

Note: IE side supports 3 auxiliaries setting.

4) Device Parameters Settings

Click , the parameters configuration screen will appear. All of the configurations are divided into

the following six selections:

*Server

This includes the configuration of server, network, and version information. All of these configurations can be

set in [Tool Bar]→[System].

Note: If the DHCP mode selected, the IP address is assigned automatically without being modified.

*Channel

User can set motion detection, video loss, OSD, image bit rate and frame rate, image parameters and record

schedule here.

Note: User is allowed to set a single channel first, and then to copy the settings to the other channels.

*Serial

User can set PTZ protocol, baud rate, and address code here. All of these settings can also be done by

selecting on the DVR [Tool Bar]→[System]→[Video].

*Alarm

User can set IO alarm and event handling here. All of these settings can be done by selecting on the DVR

[Tool Bar]→[System]→[Alarm].

*User Management

Includes user authority and password settings. This will be found on the DVR at

<Tool Bar>→<System>→<System Setting>→【Advanced Setting>>】

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

ZMODO H.264 Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) ZMODO H.264